Do you need a professional for whole house water filter installation? A step-by-step guide to DIY installation!

Do you need a professional for whole house water filter installation? A step-by-step guide to DIY installation!

Whole house water filter installation usually requires some basic tools and skills. While it is possible to hire a professional to do the installation, DIY installation of a whole house water purifier is also possible as long as you have some basic home repair skills and knowledge about the subject. Here is a step-by-step guide to help you DIY install a whole house water purifier.

Materials and Tools

Before you start installing a whole house water purifier, you need to prepare the following materials and tools:

1. whole house water purifier system (including main unit and cartridge)

2. cartridge installation tools (usually supplied with the whole house water purifier)

3. drain pipes (choose the right size and material according to your needs and piping layout)

4. fittings and pipe connectors (make sure they are compatible with your pipes)

5. gaskets and sealing tape (for leak prevention)

6. spanners and spanners (for tightening screws and joints)

7. ruler and pencil (for measuring and marking)

Step: Choose the right location

Firstly, you need to choose a suitable location to install the whole house water filter. Usually the location is chosen after the water pipe enters the house, this ensures that the water supply to the whole house is filtered by the water purifier. You can choose to install the whole house water purifier at the water meter of the house or at the point where the water pipes diverge. Make sure that the selected location has enough space for the placement of the whole house water purifier system.

Step 2: Water Purifier System Installation

1. Measure the water pipes: Use a ruler and pencil to measure the dimensions of the water pipe inlets and outlets at the chosen installation location.

2. Close the main water valve: Before installing the water purifier, close the main water valve to stop the water flow.

3. INSTALL THE MAIN BODY: Use the installation tools to secure the main body of the water purifier in the selected location according to the installation guide of the water purifier system. Make sure the water inlet of the water purifier is facing the water pipe inlet.

4. CONNECT INPUT AND OUTPUT PIPES: Use pipe connectors and fittings to connect the water pipes to the water inlet and outlet of the water purifier. According to the size and model of the water pipe, choose the appropriate fittings and tighten them using a spanner and wrench.

5. Add gaskets and sealing tapes: Add gaskets and sealing tapes to all connections to ensure they are tightly sealed to prevent water leakage.

Step 3: Cartridge Installation

1. Read the cartridge installation guide: Water purifier systems usually come with specific cartridges, each with its own installation procedure. Read the cartridge installation guide to learn how to properly install your cartridge.

2. Remove the old cartridge: If you already have an old cartridge, follow the guide to remove it.

3. Wash and moisten the new cartridge: Before installing the new cartridge, rinse it in cold water for a minute or two, then soak the cartridge in warm water for 5 minutes to fully moisten it.

4. Install the new cartridge: Insert the new cartridge into the cartridge slot of the main unit of the water purifier according to the cartridge installation guide. Use the cartridge installation tool to fix it.

Step 4: Drain Installation

1. Measure the drain: Use a ruler and pencil to measure the size of the house drain below the chosen location and the size of the drain in the water purifier.

2. Connect the drain hose: Install a drain hose of appropriate size and material at the drain opening of the water filter. Connect the drain hose to the house drain opening, making sure to tighten the joint using sealing tape and a spanner.

3. TEST AND DRAIN: Open the main water valve and observe the water purifier system for proper operation. Open the drain of the water purifier and make sure that the water flows smoothly and there are no leaks.

Summarise.

DIY installation of a whole-house water purifier can take some time and skill, but as long as you follow the steps, understand the installation instructions, and remain patient, you should be able to complete it successfully. However, if you're confused or unsure, it's still a good idea to seek professional help to ensure proper installation and operation of your whole house water purifier system.